Wednesday, March 07, 2012

FAQs on why cement should not be applied on heritage churches

There seems to be a lot of misconceptions about cement and heritage churches. Members of the clergy are not aware that covering heritage churches with cement actually does more damage to the structure rather than protect it. This is also true for most built heritage made of adobe, brick or coral stone.

Interior of Paracale Church
In fact, during my recent trip to Camarines Norte, I noticed the exterior of the Paracale Church was covered with cement and the inside walls were moist and covered with moss. No wonder they complain that painting the interior was useless. The water seeped inside since the cement prevented the stone from breathing, blocking the water from evaporating outside.

Lime and cement plaster being applied on Vigan Cathedral (Photo from Shawi Cortez)
Right now, there is news about the cementing of the facade of the Vigan Cathedral which is part of the UNESCO World Heritage property, causing a lot of distress within the conservation community. It turned out to be a mix of cement and lime which may be acceptable in certain situations but not recommended since it makes the mortar brittle.

So what's all the fuss about cement? Here are some FAQs which can help us understand the damage cement can do.

What kinds of intervention cause damage or deterioration to an adobe, brick or coral stone structure?
According to Dr. Fernando Zialcita, peeling off the lime plaster (paletada) or applying a cement coat are not solutions. They actually cause more damage. He says, "Peeling off the lime plaster will expose the bricks to deterioration. On the other hand, a cement coating, being too dense, may keep the brick from breathing and cause its deterioration."

He adds, "The problem is that there has been a break in the transmission of traditional technology. This occurred after WWII. The spread of reinforced concrete caused builders to think that its principles could be applied to all types of buildings. And that they were always superior. Wrong!"

What damage can happen to a stone structure that is covered by a layer of cement?
Conservator Tina Paterno recounts her experience with the Sta. Ana Church which was covered in a layer of cement, "I remember knocking on Sta. Ana's walls, and localized areas were indeed hollow. The adobe is pulverizing at the surface, where water migrates when it wants to evaporate but can't do it quickly enough; so it is trapped right beneath the cement."

Stucco and Paint Restorer Tats Manahan, who worked on the Sta. Ana Church, adds, "The hollow sound in Sta. Ana was due to the pulverization of the adobe beneath the Portland cement which was a good inch or more. When we chipped off the cement, there were hollowed out parts of the adobe. The degradation was due to the water seepage from a leak on the roof, which was fixed first before applying the lime plaster, which was done in the standard three coats with the prescribed proportions of lime and sand on each strata."

Architect Dom Galicia agrees, "Portland cement does not allow water to escape, causing the stone underneath to turn to powder and the stability of the structure to be compromised."

How does one protect an adobe, brick or coral stone structure?
Paterno says the solution is the re-application of lime plaster. But it all depends on the material though. If a coral stone or light adobe structure was covered with cement, peeling the cement coat would be good for the building. Then re-application of lime plaster should follow.

Lime and sand paletada being applied on the Malate Church (Photo by Richard Bautista)
Is there a formula for mixing lime with sand? Is there a formula for how much lime to apply on a building?
According to Manahan, the general formula for the paletada mix is three parts lime and one part sand. But again, a structure must be properly studied and documented first to determine the situation and later decide on the solution. It is the degradation of the wall which will determine the sand grain and lime grind, and how much of the mixture to apply.

From the results of the documentation, you will also determine whether to chip off the old paletada, which may or may not be needed depending on the stability of what is existing. If it is still okay, one may leave it there, then apply an initial foundation that will blend in the old and new paletada before actually applying the new layer.

There are several variables and one needs someone trained to determine the proper approach. It must be stressed that you have to analyze the surface first to determine the need. There is no clear cut formula. But Manahan stresses that one thing is certain, you never stabilize an adobe or brick structure with cement. That is never done.

And you should avoid mixing lime with cement as well. That is called bastard lime which doesn't work for most adobe and brick. Manahan points out, "The reason why the use of Portland cement is discouraged for use in heritage buildings is because it is too strong a material to be put on top of natural stones like adobe. The softer lime and sand mortar is more compatible with the porosity of these stones. However, a Portland cement, lime, and sand plaster mix is acceptable for newer buildings using modern materials. It's great for granite grouting, for example."

She adds, "Mixing cement with lime causes brittleness of the mortar. It flakes off in large chunks, lifting off from the roughcoat, pretty much like uncooked kropek. Escuela Taller does not use cement and lime, but lime and sand. Christian Aguilar and I did the standard mix for Escuela Taller since both of us are instructors there."

Students of Escuela Taller applied a protective coat of lime and consolidated the walls of the Almacenes Reales in Fort Santiago. The final coat is yet to be applied. (Photo from Escuela Taller)
Who can be approached for advice on the proper materials, manpower and technology for the restoration of facades?
Escuela Taller is one possible source of skilled manpower. Escuela Taller "is a school that teaches trades within the construction industry, more importantly those that will help in the restoration of Intramuros and other built heritage sites in the Philippines. It was established through a grant from the Agencia EspaƱola de CooperaciĆ³n Internacional Para el Desarrollo (AECID) and the National Commission for Culture and the Arts, with its partners: the Technical Education and Skills Development Authority (TESDA), the Department of Social Welfare and Development (DSWD), and the Intramuros Administration (IA)." Their students and graduates have been trained in the proper application of lime coating among many other skills. You may contact them at escuelatallerintramuros@gmail.com.

Aside from government cultural agencies, the Heritage Conservation Society and ICOMOS Philippines also have members trained in conservation. You may contact the two organizations through their respective e-mails: info@heritage.org.ph and info@icomosphilippines.com.

Pasig Cathedral before work on the facade started in April 2006 (Photo by Christian Aguilar)
Pasig Cathedral in October 2006 after the lime plaster was completed (left) and with the new colors and plaster in June 2011. Notice the yellow, white and red combination based on historical colors during the Spanish colonial period (Photos from Christian Aguilar)
Won't applying a fresh coat of lime or paletada make a heritage structure look new?
In reaction to the lime washing of the Daraga Church, Archt. Manolo Noche comments, "True that sometimes the process of conserving may result in a sort of shock factor with the resulting finished product, as with the case of Daraga, Pasig, San Agustin, when a new coat of palitada was applied. But one should ask, are we to preserve what we are familiar with or preserve what is to ensure the continuing legacy of a patrimonial structure. Lime washing will definitely make the building appear white. But as I always say, give it time and it will start to turn grey, with all the pollution in the atmosphere. Personally, I find the white wash on Daraga rather pleasing and reminds me so much of the mission churches in California, which are all white washed."

Speaking about the Daraga Church, there were a lot of negative reactions to the lime washing of the facade. Archt. Rajelyn Busmente of the NCCA explained the process and methodology:

"In February 2009 the walls were cleaned by the NHCP.

Northern facade of the Daraga Church on April 27, 2009 (NCCA)
Northern facade of the Daraga Church after restoration (NCCA)
"For Phase I, conduit was the Municipality of Daraga and point person was Archt. Ana Lorilla under the supervision of National Museum. [Work] began on May 15, 2009 on the wall that faces Mayon, which included the following scope of works:

1. Mechanical and chemical cleaning
2. Repointing of loose stones
3. Repair and water proofing of concrete gutter / Removal of asbestos pipe, replaced with PVP Pipe.
4. Repair and consolidation of rubble stone and masonry / Restoration of stone sculpture and engravings
5. Restoration of buttresses
6. Lime plastering and lime wash

Main facade of Daraga Church on February 15, 2010 (NCCA)
Main facade of Daraga Church on April 14, 2011 (NCCA)
"For Phase II, implementor was Bicol Consortium for Development Initiative, Inc. and point person was Archt. Ana Lorilla under the supervision of the National Museum. The main facade scope of works included:

1. Mounting of scaffolding
2. Removal of cement plaster
3. Mechanical and chemical cleaning
4. Removal and loose stones and plants
5. Restoration of sculpture and engraving
6. Lime plastering
7. Repair and consolidation of stones
8. Lime washing

"The basis for restoring was done through study, research, laboratory testing, and sometimes experimentation. If the church was with paletada, then we put back what it had on, what others may call as Reverse Engineering. If it does not have paletada, further studies are done if the stones might need paletada and then this is placed as protective skin layer of the building.

"The lime wash had caused a culture shock amongst the community and tourists since most people are not familiar with lime wash, comments such as, 'Why did you paint the wall of Daraga Church white?' was a common question.

"The NCCA admits to the lack of public information drive in preparing the community and the tourists as to the visual impact that conservation and preservation does to the eyes. After 243 years of non-restoration, of course this is what will happen if it looks new again.

"In April 13-14, 2011, NM, NHCP and NCCA went to Daraga to meet with the Mayor to explain the buffer and core zone importance of a National Cultural Treasure. On the same day a forum with the media and public forum was also conducted explaining that what was done to the church was to protect, preserve, conserve and restore it so that future generations will be able to still have the heritage to enjoy. Painful as it may seem to most people even to the community who seemed to become angry, it is the scientific method and will continue to be done to all the National Cultural Treasures and other heritage churches that require paletada.

"Hope that more people would come to understand what heritage conservationists are doing to protect heritage and eventually accept it. I honestly believe we have a long way to go."

On the Vigan Cathedral, Dr. Zialcita confirmed that "Arch. Fatima Rabang, who has worked with the Committee on Monuments and Sites of the NCCA, is using a mixture of lime and cement. Not pure lime, rather with some cement admixture. Then Ricky Trota Jose texted me that Fr. Rory [Reyes], who is in charge of the entire project, says he is using a lot of lime sourced from the town of San Ildefonso. Fr. Rory too is a heritage buff, whom some of us know personally and admire."

21 comments:

  1. Anonymous7.3.12

    Thanks for this informative article. I always bring my tourist friends in Daraga Church as one of the tourist destination here in Albay. I for one was struck when I saw it painted in white . I asked one of the priest assigned in Daraga Church about the white painting and he told me that its the original color of the Church. But with your article I was more enlightend about the process.

    ReplyDelete
  2. I must admit, I was also shocked when I saw the newly-restored daraga church... I, also thought it was paint... but when Estan explained it in PTB group.. i understood what it is...

    this is a very informative post... thanks for sharing...

    ReplyDelete
  3. Great article and research Ivan. Very enlightening.

    ReplyDelete
  4. Gerson8.3.12

    This article made me laughed. Here's what happening. First, there is an obvious condesation inside the church. In a humid climate like the Philippines, you know that there's always water vapor in the air. Water vapor always moves moves from high to low pressure areas; from warm to cold, it can pass through most building materials. The inside of the church is usually colder because it's being insulated by the thick masonry wall or by air condioniting. At some point, the relative humidity of the space will reach it's dew point and will condense into liquid. This condensation can be controlled by proper ventilation by providing more windows or roof vents. Have you noticed that there are hardly windows in this building? The reverse can also happen during the night when water vapor from people breathing inside the church are moving towards the outside where the air is colder and water is condensing inside the bricks. So again, the water vapor has to be vented out.

    Second, it's possible that there are leaks at roof and windows that gets inside the cracks of the building.

    So, it's not about the portland cement, it's because these old churches have no ventilations. By the way, lime is an ingredient of portland cement and a lot of houses out there are covered by stucco (and they are doin'okay 'cause they are well vented), which is actually portland cement. I know, 'cause I'm an architect and a building consultant.

    ReplyDelete
  5. Your first sentence made me laugh as well. Good to know you are an architect and building consultant. Unfortunately, you are not a conservator or restorer. I'd trust them and conservation architects to handle heritage structures rather than architects without proper training in conservation.

    ReplyDelete
  6. Tina Paterno9.3.12

    I've specified lime and a bit of Portland very frequently, and with great success. I think the portland is necessary for initial set, so that if it rains soon, the whole lime plaster system doesn't melt away too soon. (lime takes a long time to cure, so if you're working with experienced masons who will prep the walls, mist it periodically, protect, etc, then pure lime is alright. But if you're going to take a chance with a contractor who hasn't spent his lifetime working with the material, then i'd put a bit of portland. If it's in a low enough quantity, then the mix retains the softness and other properties of lime, but has some of the hydraulic properties / quick set of portland. If the lime mix itself is naturally hydraulic, (has naturally occuring clays in the mix), then portland isn't necessary.

    My experience with lime acting like kropek is only when lime isn't slaked properly so it pops off the building. But my experience with a bit of portland - lime mix has never produced that result. (or is the portland cement here very different?)

    I do think that when selling the idea to people who have not worked with lime ever, we should try and reduce the potential incidence of their failure, or they may never work with it again! We should trade stories when we meet, there may be another culprit to the kropek stucco....!

    ReplyDelete
  7. Tats Manahan9.3.12

    As i told ivan, there are different scenarios thats why it is really important to analyse the surface first. And even then, the surface may not have uniform needs depending on the degredation. The kropek effect happens when the lime-portland mix is exposed to too much sun.

    I think more than the slaking, it would be the wrong burning of the lime that would be the culprit. Again, lime sourced from diffrent areas may require different burning temperatures to make it suitable for construction use. If burnt properly, the addition of portland wont be necessary.

    Many variations... The best thing really would be to find a standard....source, oven, etc. Because its a natural material, it is variable. English, Italian, German limes which i've worked with are all different. And even in each region in Italy for example, they still vary. Ideally, we should work on a Philippine standard.

    ReplyDelete
  8. gerson9.3.12

    I apologize for not reading thoroughly. In case of adobe, you are right Ivan, cement is heavier than the adobe and will just grab a big chunk of adobe which is basically mud when they detach. In fact, a little water is good for the mud.

    ReplyDelete
  9. Rene Luis Mata9.3.12

    I have had this experience, too, when I wrote (with my students) of the possibility in some cases where lime is better as a contemporary building material than portland cement, categorized under architectural building science. I got violent reactions from my reviewers. They were stuck with the idea that portland is THE space-age product. My article only presented the existence of tests that proved it, not to supplant portland cement, but to consider lime as a better material in some cases, like low-rise mass-housing, (tabique, for example) and they told me to rewrite it. There's also this notion that lime is only for heritage.

    BTW, my article got printed. Its in the Espasyo Journal for 2012 (NCCA). The battle continues.

    ReplyDelete
  10. Anonymous9.3.12

    I don't understand any part of remodeling & won't pretend cuz I am sure anyone W alot of expierience would see right thru my lies. I love reading about the history of buildinggs & homes around the world. It is very interesting.

    ReplyDelete
  11. Tats Manahan9.3.12

    Yes, portland is lime based. But consider the additives, chem process, etc. Herein lies the difference.

    ReplyDelete
  12. Christian M. Aguilar10.3.12

    A reason why people are hesitating to use lime lies in the fact that the use of lime was abolished after 1945, due to the use of easier to handle cement.
    Quote from "an expert" in 2006 >>:"There are no knowledgeable people (in the Philippines), there is no standard, and it has never been approved for usage by any code or standard here. Ergo, one mustn't use it."<<

    Also the "UNESCO approved" formula (lime : cement : sand 1:1:9-11), said to have been tediously "invented" by local agencies, does not take into consideration, that already in the mid 80s it was an established fact (in other parts of the world) that heritage structures should only be coated with lime based renders without additions of cement. In the literature this "UNESCO formula" is even annoted to NOT BE USED on old or heritage structures.

    In conclusion, this fight for the appropriate material on (heritage) structures has to be fought in the fields of awareness, knowledge and skill.

    One other thing: Through out most of the (european) history, exteriorly limed surfaces were known to be a "lossy" surface. Means, it was never intended to last for ever. To make it actually last more then a few years, it needed to be maintained: 1. by a thoughtful construction design, 2. by being applied by well trained craftsmen 3. by a meticulous after-construction maintenance scheme.

    ReplyDelete
  13. Dominic Galicia10.3.12

    Images of uncooked kropek suffice to intimidate the most foolhardy.

    ReplyDelete
  14. Tats Manahan10.3.12

    Dom,
    The other would be crushed polvoron if lime is subjected to moisture then dries up. Too much sun or moisture lime becomes a snack.

    ReplyDelete
  15. Fernando Zialcita10.3.12

    Wow, it sure is difficult to get the right mix. But what compensates is the FEEL of lime draped over the stones underneath. It has a gentler feel and it allows the light to create shapes that are sculpted but with softer shadows.

    Thanks!
    Butch

    ReplyDelete
  16. Christian M. Aguilar11.3.12

    Not only the feel, but the look too. A lime plastered and7 or lime washed surface is different from anything else.
    Besides those there are also other benefits, such as hygiene and sanitation.

    Regards

    ReplyDelete
  17. Fernando Zialcita11.3.12

    Dear Ivan,

    Thanks and thank you too for posting walls with applied lime plaster.

    1) Finally Almacenes Reales at Ft. Santiago looks better. When first reconstructed, the idea was to expose the red brick with dark gray cement peering in between. Ugly! And depressingly dingy! Now the light molds the surface of the wall -- just like in Mediterranean and Mexican stone structures OR just like in the vintage temples and palaces of Thailand and Java!

    2) Daraga's baroque magnificence can now be better appreciated because of the play of light and shadow on the walls. For decades, it was hard to do so because the entire mass had turned dark and shabby.

    Too bad sectors of the public mistake deterioration for poetry, and so oppose returning lime plaster coating to the adobe walls. Our vintage structures were supposed to look relatively CLEAN. Thus before the 194os, a regular coating of lime was applied. What happened was that post-1960s they were neglected. And so the lime peeled off, exposing the bricks and the adobe underneath. Moreover, plants began to grow on the walls. What was abnormal began to be taken as normal!

    Regards,
    Butch

    ReplyDelete
  18. Anonymous15.3.12

    Hi Ivan,

    Why are the bell towers of Pasig Cathedral and Daraga Church NOT coated in paletada. Since the towers would have the same material as the main church, should not these be protected as well?

    ReplyDelete
  19. That, I believe, is a function of budget. At least the facades (or whatever is more crucial) are protected for now. I think the belfry of Daraga is up next. For Pasig, since it's privately funded, we don't know when.

    ReplyDelete
  20. Anonymous21.6.12

    Thank you for providing this information

    ReplyDelete
  21. rp arjona26.9.12

    good news! the restoration & conservation process on the daraga church belfry is now ongoing!

    ReplyDelete

Related Posts with Thumbnails